Haier HWM-2.0/S User Manual

Contents

Haier HWM-2.0/S User Manual Manual pdf 4 page image

Safety precautionsDo not damage the power cord, bend , extend, twist, bind or alter it by force. Do notpress or nip it with weight. If the supply cord is damaged, it must be replaced by themanufacturer or its service agent or a similarly qualifiedperson in order to avoid a hazard. Keep the pin of thepower plug clean, if the power plug is polluted withdust, please wipe with dry cloth carefully.The power cord plug should be convenientto be pluged in or pluged out with handwhile the washing machine runs normally.Be sure to pull the plug out and close thewater tap when the machine is idle, whenmoving the machine, or when cleaningthe machine. Do not use wet hand to ins-ert or pull out the power plug.For washing machine with ventilationopenings in the base, that a carpetmust not obstruct the openings.Do not let the machine share one receptacle with otherelectric appliances. If the power plug is damaged, orthe plugging into the receptacle is loose,do not use the plug any more.Do not wash water-proof laundries likethe raincoat, bike covers etc.Do not use water hotter above 50 C .Do not put the machine at damp place likethe bathroom. Never wash it with water.Not put wet laundries on the control panel.soft itemsThe ventilation holesat the bottomPlease insert the power cord intospecial receptacle with rated vol-tage. Be sure to use single-phasethree pins receptacle.The earthingterminal of the receptacle must beearthed reliably. If possible, pleaseadopt electric leakage protector.2