Haier HW70-1401 User Manual

Also see for HW60-1001: User manual

Contents

Haier HW70-1401 User Manual Manual pdf 6 page image

06 BEFORE USEDISMANTLE THE TRANSPORTATION BOLTSThe transportation bolts are designed for clamping anti-vibration componentsinside of the washing machine during the transportation process.Remove the back cover.1.Remove the four bolts on the rear side and take out the synthetic2.stabilisers from within the machine.Replace the back cover.3.Fill the holes left by the bolts with blanking plugs.4.Note:1.Please pull out the power plug before removing thetransportion bolts.2.When you replace the back cover,the convexity must faceto outside, and you have to insert the back cover from thetwo gaps as shown in fig.5.3.Keep the transportation bolts and synthetic stabilisersin a safe place for later use.ADJUSTING THE WASHING MACHINEThere are adjustable feet under the bottom of the washing machine. Before use, they should beadjusted so that the machine is level. This will minimise vibrations and thus noise during use. It willalso reduce wear and tear. We recommend using a spirit level to level the appliance.The floor shouldbe as stable and flat as possible.INSTALLATIONfig.5.