Haier HVW12ABB - Thermal Electric Wine Tower User Manual

Contents

Haier HVW12ABB - Thermal Electric Wine Tower User Manual Manual pdf 7 page image

English6fig. # 1Use of Extension Cords• Avoid the use of an extension cord because of potential safety hazards undercertain conditions. If it is necessary to use an extension cord, use only a 3-wireextension cord that has a 3-blade grounding plug and a 3-slot outlet that willaccept the plug. The marked rating of the extension cord must be equal to orgreater than the electrical rating of the appliance.Install Limitations• Do not install your wine cellar in any location not properly insulated or heatede.g. garage etc.• Select a suitable location for the wine cellar on a hard even surface away fromdirect sunlight or heat source e.g. radiators, baseboard heaters, cookingappliances etc. Any surface unevenness should be corrected with the leveling legslocated on the front and rear bottom corners of the wine cellar. Avoid placing unitwhere there may be electrical interference.• Your wine cellar is designed for free-standing installation only. It is not designedfor built-in application.NOTE: To minimize the risk of rusting, leakage and insulation damage, avoidplacing the unit in a place where heavy moisture is present. Under nocircumstances spill or directly apply water onto or into the unit.Door Alignment (see fig. # 1)1. Remove the top hinge cover.2. Loosen the top hinge screws using a Phillips Head Screwdriver.3. Adjust the door.4. Replace the top hinge cover.5. Adjust bottom hinge if necessary.