Haier HVF020A User Manual

Also see for HVF020A: User manual

Haier HVF020A User Manual Manual pdf 8 page image

Wine Cooler Features And UseElectronic Controlled Units:Once you have plugged the unit into an electrical outlet, let the unit run forat least 30 minutes to acclimate itself before making any adjustments.During this time the Red Wine light may stay on.Mechanical Controlled Units:The control for this is on the back of the unit. There are 6 settingsplus 0 (OFF). Initially set the temperature setting to 3. Let the unit run for atleast 30 minutes to acclimate itself before making any adjustments.7Initial SetupElectronic Control Unit: See fig. # 1• The wine cooler is preset from the factory to automaticallyaccommodate temperature requirements for red or white wines.If you store mostly white wines, press the "White Wine" button and thewine cooler will maintain an average temperature between45˚ to 50˚ F. Pushing the "Red Wine" button will yield anaverage temperature between 55˚ to 60˚ F.• The wine cooler can be set to any temperature you desire toaccommodate your wine storage requirements. To set the temperature,press both the "White Wine" and "Red Wine" buttons simultaneouslyand hold for approximately 3 seconds. Now you are in temperature setmode. Decrease the temperature by pushing the "White Wine" buttonand increase the temperature by pressing the "Red Wine" button.Pressing the appropriate button 3 times will adjust the temperature 3degrees, press 4 times equals 4 degrees, 5 times equals 5 degrees, andso on. Once you have selected the temperature you desire, push the"Light/Set" button. Now the wine cooler is programmed and the LEDreadout will return to current internal temperature reading.Temperature Adjustments:EnglishEnglish7