Door AlignmentFreezer Door: (see fig. 7/ 1)1. Remove hinge cover screw,2. Remove the top hinge cover.3. Loosen the top hinge screws using a phillips head screwdriver.4. Adjust the door or put a spacer in between and then tighten the screws.5. Replace the top hinge cover.Hinge box_cover< Top hingerig. # 1Refrigerator Door: (see fig. # 2)1. Loosen and remove the bottom hinge using aphillips head screwdriver.2. Adjust the door, or put a spacer in between andthen tighten the screws.bottom hinge padlower bracketfig. # 2pivot pin'% lower pivot pin hole