Haier HSL04WNBSS - 02-01 User Manual

Also see for HSL04WNBSS: User manual User manual

Contents

Haier HSL04WNBSS - 02-01 User Manual Manual pdf 9 page image

8EnglishReversing the Door Hinge1. Remove the top hinge cover screw and then removethe top hinge cover. (see fig. # 1)2. Using a Phillips Head Screwdriver, loosen and remove thescrews holding the top hinge in place. (see fig. # 1)3. Remove the top hinge and carefully lift off the door.4. Remove the screw hole plug from the opposite side andinsert the plug in the screw hole openings of the justremoved screws. (see fig. # 2)5. Remove the door pin from the bracket of the lowerhinge by turning counter clockwise. Move the pin to theopposite hole and tighten. (see fig. # 3)6. Loosen the screws holding the lower hinge bracketand remove the hinge.(see fig. # 3)7. Align the holes in the lower hinge bracket to thecorresponding holes in the opposite side of the cabinet.Insert and tighten the screws.(see fig. # 3)8. Align the bottom hole on the left side of the door with thepin of the lower hinge and slide into place.fig. # 2screw hole plugsHSLO4WNBSSmanual 10/22/01 12:32 PM Page 9