Haier HSB03VS - 2.7 Cu Ft Compact User Manual

Also see for HSB03: User manual User manual User manual User manual Manual

Contents

Haier HSB03VS - 2.7 Cu Ft Compact User Manual Manual pdf 5 page image

Install Limitations• Do not install your refrigerator in any location not properly insulated or heated e.g.garage etc. Your refrigerator was not designed to operate in temperature settingsbelow 55˚ Fahrenheit.• Select a suitable location for the refrigerator on a hard even surface away from directsunlight or heat source e.g. radiators, baseboard heaters, cooking appliances etcDoor Alignment (see fig. # 1)1. Remove the top hinge cover by using a flatheadscrewdriver. Place the head under the front edgeof the cap and gently lift.2. Loosen the top hinge screws using a Phillips headscrew driver.3. Adjust the door or put a spacer in between andtighten the screws.4. Replace the top hinge cover by aligning the rearof the cover with the rear of the hinge. Press firmlyon the front of the cover until it snaps in place.REFRIGERATOR FEATURES & USEGeneral FeaturesAdjustable temperature dial:Your refrigerator will automatically maintain the temperature level you select.The temperature control dial has 7 settings plus off. 1 is the warmest. 7 is thecoldest. Turning the dial to OFF stops cooling in both the refrigeration andfreezer sections. At first, set the dial to 4 and allow 24 hours to pass beforeadjusting the temperature to your needs.(Note: If the refrigerator has been placed in a horizontal or tilted position forany period of time wait 24 hours before plugging the unit in.)Refrigerator Interior ShelvesTo remove or replace a full-width slide-out shelf:(see fig. # 2)1. Gently tilt the shelf up and slide forward until the shelf has been completelyremoved.2. To replace the shelf, gently slide the shelf back.fig. 1fig. 2English3