Haier HLP22P - 06-03 User Manual

Also see for HLP22P: Features and specifications User manual User manual

Haier HLP22P - 06-03 User Manual Manual pdf 24 page image

English23Troubleshooting GuideBefore calling for service, determine the symptoms and follow the suggestedsolutions:Washer does not operate:• Check if unit is plugged in. The plug may have come loose.• Check if the electrical wall receptacle is of proper voltage.• Check if the circuit breaker needs to be reset or if the fuse needs to be replaced.• Check if the washer is overloaded. The load may need to be re-balanced andclothing may need to be redistributed.• Check if the door is open. You may have to close the door properly.• The washer pauses during some cycles. This is normal during the "Synthetic"cycle, which have short soak periods for. You will not hear the washer operate fora short period of time. When the soak time is over, it will startautomatically.• Check if the program/option selections are set properly. You may have to adjustthe settings.• Check if you have selected the "Delay Start" option. You may have to turn thatoption OFF and reselect.• Check the Power "ON/OFF" button to see if it is in the OFF position. You mayhave to press the button to set it in the ON position.• Check if the "Start/Pause" button is on "Pause" mode. Press this button to start thewash process.• The wash process is paused. This is normal. The clothing sensor is checking toverify that there are clothes inside the washtub. Water will be addedapproximately 48 seconds later.• The pulsator pauses during incoming water flow in the wash and rinse cycle. Thisis normal. This prevents splashing during the water inlet.