Haier HLP21N Installation And User Manual

Also see for HLP21N: User manual Energy guide Service manual User manual

Haier HLP21N Installation And User Manual Manual pdf 11 page image

9ELECTRICAL REQUIREMENTSWARNINGElectrical Shock HazardThe washer must be connected to a properly grounded 120 volt, 60 Hz.,AC only, 15- or 20-amp, fused electrical supply. A time-delay fuse orcircuit breaker is recommended.Failure to do so could result in death, re or electric shock.• If you are in doubt the electric supply provided meets the above requirements,contact a licensed electrician.WARNINGElectrical Shock HazardPlug into a grounded 3 prong outlet.Do not remove the ground prong from the power cord plug.Do not use an adapter.Do not use an extension cord.Failure to do so can result in death, re or electrical shock.• A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required.A time-delay fuse or circuit breaker is recommended. It is recommended that aseparate circuit breaker serving only this appliance be provided.• This washer is equipped with a power supply cord having a 3 prong groundingplug.• To minimize possible shock hazard, the cord must be plugged into a mating,3 prong, grounding-type outlet, grounded in accordance with local codes andordinances. If a mating outlet is not available, it is the personal responsibility andobligation of the customer to have the properly grounded outlet installed by aqualified electrician.