Haier HLC19R Service Manual

Also see for HLC19R - 19" LCD TV: User manual

Haier HLC19R Service Manual Manual pdf 25 page image

25Caution: Do not look into the optical output port.Looking at the laser beam may damageyour vision.PC ConnectionHow to connect1. To get the best picture quality, adjust the PC graphics card to 1024x768 .2. Use the TV`s PC or DVI (Digital Visual Interface)Audio IN port for video connections, depending onyour PC connector.■ If the graphic card on the PC does not output analog and digital RGB simultaneously, connect onlyone of eitherVGA IN or DVI IN to display the PC on the TV.■ If the graphic card on the PC does output analog and digital RGB simultaneously, set the TV toeither VGA or DVI; (the other mode is set to Plug and Play automatically by the TV.)3. Then, make the corresponding audio connection. If using a sound card, adjust the PC sound asrequired.How to use1. Turn on the PC and the TV.2. Turn on the display by pressing the POWER button on the TV's remote control.3. Use INPUT on the remote control to select VGA or HDMI source.4. Check the image on your TV. There may be noise associated with the resolution, vertical pattern,contrast or brightness in PC mode. If noise is present, change the PC mode to another resolution,change the refresh rate to another rate or adjust the brightness and contrast on the menu until thepicture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphiccard or consult the manufacturer of the PC graphic card.NOTES:1 Use a DVI cable.2 Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image maybecome permanently imprinted on the screen.3 The synchronization input form for Horizontal and Vertical frequencies is separate.R esoluti onFra mefre q ue ncy(Hz)VGASVGAXGA640*480 60Hz800*600 60Hz/75Hz1024*76860HzMo de Re sol uti on75Hz85Hz