Haier HDB18EB User Manual

Also see for HDB18EB: Service manual

Contents

Haier HDB18EB User Manual Manual pdf 12 page image

EnglishPausing a Wash Cycle:The "POWER" button serves the purpose of the "Pause" function as well aspowering the machine on or off.If you need to pause in the middle of the cycle to add or remove any items, followthe steps below:1) Press "POWER" button to the "OFF" position to pause the cycle. You will noticethat the power indicator display light shuts off.2) Open the door by squeezing the door latch slowly.Note: Do not open the door until the water spray action stops. Be careful ofmoist hot air that may rise out of the dishwasher.3) Add or remove items. Once you have finished adding or removing, simply closethe door properly.4) Press the "POWER" button to the "ON" position to resume the cycle. You willnotice that power indicator display light turns on.Open Door Protection:Your dishwasher will stop automatically if the door is opened during the operation.The dishwasher will not start until the door is closed again. Once the door is closedthe cycle will resume automatically.102) To reset a wash cycle, turn the knob "Clockwise" to your desired wash cyclesetting.3) Press "POWER" button again to the "ON" position to turn the dishwasher on.You will hear a "Click" that signifies the automatic start of the wash process. Youwill also notice that power indicator display light turns on.