Getting Started11① Power OnImmediately after the power on, the temperature is displayed as the actual temperature of therefrigerating and freezing chamber. At this time, the set temperature for refrigerating is 5℃, the settemperature for freezing is -18℃, Light Wave Fresh light is on, and the buttons are in unlockedstutus.The refrigerator has Power Outage Memory function. At every power on after the first power on therefrigerator will run under the settings set at the last time. (See “Power Outage Memory Function”for details)② Operation Mode of the RefrigeratorCautionWithin the applicable temperature range of the refrigerator, as long as you selected theFuzzy Mode, you will not need to adjust other settings to maintain the best freezingeffect regardless of the ambient temperature changes. Make you worry less and workless.You may select one of the two modes bellow to set your refrigerator as needed.(1) Fuzzy Mode: We recommend using the Fuzzy Mode, if where is no special need.(See “Fuzzy Function Setting” for details)(2) Manual Mode: The temperature can be set by using temperature control button.(See “Temperature Setting and Adjustment” for details)③ Put the food into your refrigeratorAfter running for a while, the inside of therefrigerator is sufficiently cooled. At this time,food can be put into the refrigerator.Note: small freezer drawer may be removedbefore putting food into large freezer drawer inorder to put more food.④ If you have lots of fresh food (such as freshmeat) to put into Freezing Chamber, pleasestart “Super Freezing” function 12 hour before.CautionWhen the temperature setting changes, the inner temperature will be balanced after awhile. The length of the period depends on the changes made to the temperaturesetting, the ambient temperature, door-open times, and the food stored in therefrigerator.Downloaded from www.vandenborre.be