Haier DWL3025 Installation Manual

Also see for DWL3025: User manual Dimensions Installation manual Energy guide Installation

Contents

Haier DWL3025 Installation Manual Manual pdf 22 page image

English211a. POWER SUPPLY CORD METHODCheck that power supply cord does not touch dishwashermotor or lower part of dishwasher tub. Go to step 5.WATER CONNECTIONHELPFUL TIP:Compression fittings: 4MJEFOVUi*wBCPVUJODI DN POUPDPQQFSUVCJOHi+w2. Slide ferrule “K” onto the tubing. Do not position ferrule on the end of thetubing.3. Put the tubing into the elbow “L” as far as it will go.4. Slide the nut and ferrule forward and start thenut onto the elbow threads “M”. Be careful whenhandling and positioning the copper tubing as itbends and kinks easily.5. To prevent vibration during operation, route the watersupply line so that it does not touch the dishwasher base,frame or motor.Make sure the water line stays within the shaded areashown on page 7 when the dishwasher is installed in the cabinet.With copper tubing “J” pushed into compression fitting as far as it will go, use anadjustable wrench and tighten compression fitting nut “I” to elbow “L” on waterinlet valve.6. Place Paper towel under elbow. Turn on water supply and check for leaks.WARNINGElectrical Shock HazardPlug into a grounded 3 prong outlet.Do not remove ground prong.Do not use an adapter.%POPUVTFBOFYUFOTJPODPSEFailure to follow these instructions can result in death,fire, or electrical shock.