sc200 conductivity moduleSpecification DetailsLinearity ≥ 1.5 mS/cm: ±1% of reading; < 1.5 mS/cm: ±15 μS/cmMeasuring range 0–2000 mS/cmResponse time 0.5 secondsPrecision > 500 μS/cm: ±0.5% of reading; < 500 μS/cm: ±5 μS/cmMaximum cable length 200 to 2000 μS/cm: 61 m (200 ft); 2000 to 2,000,000 μS/cm: 91 m (300 ft)Warranty 1 year; 2 years (EU)General informationIn no event will the manufacturer be liable for direct, indirect, special, incidental or consequentialdamages resulting from any defect or omission in this manual. The manufacturer reserves the right tomake changes in this manual and the products it describes at any time, without notice or obligation.Revised editions are found on the manufacturer’s website.Safety informationN O T I C EThe manufacturer is not responsible for any damages due to misapplication or misuse of this product including,without limitation, direct, incidental and consequential damages, and disclaims such damages to the full extentpermitted under applicable law. The user is solely responsible to identify critical application risks and installappropriate mechanisms to protect processes during a possible equipment malfunction.Please read this entire manual before unpacking, setting up or operating this equipment. Payattention to all danger and caution statements. Failure to do so could result in serious injury to theoperator or damage to the equipment.Make sure that the protection provided by this equipment is not impaired. Do not use or install thisequipment in any manner other than that specified in this manual.Use of hazard informationD A N G E RIndicates a potentially or imminently hazardous situation which, if not avoided, will result in death or serious injury.W A R N I N GIndicates a potentially or imminently hazardous situation which, if not avoided, could result in death or seriousinjury.C A U T I O NIndicates a potentially hazardous situation that may result in minor or moderate injury.N O T I C EIndicates a situation which, if not avoided, may cause damage to the instrument. Information that requires specialemphasis.4 English