94 Reference GuideReferenceInternationalFor regulatory identification purposes, your product is assigned a regulatory modelnumber. The regulatory model number for your product is listed in the declarationfollowing table. This regulatory number is different from the marketing name andproduct number.DECLARATION OF CONFORMITYAccording to ISO/IEC Guide 22 and EN 45014Manufacturer's Name: Hewlett Packard CompanyManufacturer's Address: Hewlett Packard CompanyDigital Projection & Imaging1000 NE Circle Blvd.Corvallis, OR 97330-4239Declares, that the product(s):Product Name: Digital ProjectorModel Number(s): xp8010 and xp8020Regulatory Model: CRVSB-03CA and CRVSB-04CAConforms to the following product specifications:Safety: IEC 60950:1999/ EN 60950:2000IEC 60825-1:1993 +A1 / EN 60825-1:1994 +A11 Class 1 LEDGB4943-1995EMC: EN 55022: 1998 Class B [1]CISPR 24:1997 / EN 55024: 1998IEC 61000-3-2:1995 / EN 61000-3-2:2000IEC 61000-3-3:1994 / EN 61000-3-3:1995+A1:2001GB9254-1998FCC Title 47 CFR, Part 15 Class B/ANSI C63.4:1992AS/NZS CISPR 22:2002Supplementary information:The product herewith complies with the requirements of following Directives and carries the CE markingaccordingly:-Low Voltage Directive: 73/23/EEC-EMC Directive: 89/336/EEC[1] The product was tested in a typical configuration with Hewlett Packard Personal Computer peripherals.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.Corvallis, Oregon, March 1, 2004Steve Brown, General ManagerEuropean Contact for regulatory topics only: Hewlett Packard GmbH, HQ-TRE, Herrenberger Straße 140, 71034Boeblingen, Germany. (FAX:+49-7031-143143).USA Contact: Hewlett Packard Co., Corporate Product Regulations Manager, 3000 Hanover Street, Palo Alto, CA94304. Phone: (650) 857-1501.