HP t620 Troubleshooting Manual

Also see for Designjet T620 Series: Quick setup guide Hardware reference guide Quick installation guide

Contents

Connecting the power cord1. Plug the female end of the power cord into the power supply brick (1).2. Connect the other end of the power cord to an electrical outlet (2).3. Connect the round end of the power supply cord to the power supply connector on the rear of thecomputer (3).4. Use the slot (4) on the side of the retractable power cord retention hook to pull the hook out.5. Press the power cord into the retention hook (5) and bundle any excess power cord.CAUTION: Failure to secure the power cable with the retention hook may result in the power cordbecoming disconnected, causing loss of data.Connecting the power cord 5