HP de 1000c Setup Manual

Also see for Z558 Entertainment: User guide Start here Limited warranty User guide TV/Display Setup Guide

Contents

choose a location

a connect the audiostep 1:get readyd power upTurn on all components in your setup:n your digital entertainment centern your televisionn your receiver (with audio input tunedto the appropriate setting)n any daisy-chained components (suchas a VCR)You'll see welcome to the hp digitalentertainment center on your TV screen.b connect the videoalternativesn If you use an audio/video receiver, you can connectthe video cable to the de100c's video OUT jack andto a video IN jack on your receiver. Audio and videoconnections from the de100c must enter the receiverwithin the same device group (for example, through anAUX group).n If your TV does not have a composite video IN jackavailable for use but another device in your system(such as a VCR) does, you can connect the de100c tothat device's video IN jack. With this daisy-chainedmethod, the device the connection passes through mustbe powered on when you use the de100c.n The de100c also has S-video and VGA connections.To use one of these outputs, purchase the appropriatecable separately.broadband: EthernetIf your router or home network requires an Ethernetconnection:Connect one end of your Ethernetcable to the de100c's Ethernet port.Connect the other end to your router (or to a networked RJ45 jack in your home).broadband: Home PNAIf you have a home phoneline network (your home isnetworked to your router via telephone wire withinthe walls):Connect one end of the phonecord (provided) to one of thede100c's phone jacks.Connect the other end of the phonecord to a networked phone jack inyour home.dial-upConnect one end of the phonecord to one of the de100c'sphone jacks.Connect the other end to a phone jack in your home.sharing a phone jackTo share a household phone jack betweenyour digital entertainment center and atelephone, either:n plug the phone splitter into yourhousehold phone jack, then connect thede100c and the phone to the splitter, orn plug your telephone´s cord into thede100c´s second phone jack.dial-up56k modem is built in.Some connection methods are not supported:Dial-up support excludes Internet ServiceProviders that rely on proprietary software,such as AOL ® and CompuServe ®, and freeISPs that require a Web browser to displaybanner ads.No additional equipment is required.broadbandConnecting through your DSL or cable modem (externalmodem required), or other broadband connection.You need additional equipment:n Router (required) — A router lets you share thebroadband connection between your de100cand a PC or other Internet-connected device.See your router's manual for details on router connections andconfiguration.n Ethernet cable (optional) — If your router or homenetwork uses an Ethernet connection, purchase thiscable separately. Home phoneline network users(Home PNA): use phone cable supplied.digitalentertainmentcenter (de100c)two AAA batteriesowner's guidephonesplitterpower cordaudio cable(red and white connectors)20-foot phone cordremote controlcomposite video cable(yellow connectors)setting up yourhp digital entertainment centerc connect dial-up OR broadbandAUDIO INCDTAPEAUX1AUX2AUDIOIR MOUSE/G-LINKRR LAVCOMPULINKVIDEO S-VIDEOAUDIOOUTINPUT1INPUT2INOUTLhome phone jackde100ctv receiverunpack your digital entertainment center check your internet readinessConnect one end of the compositevideo cable to the de100c'scomposite video OUT jack.Connect the other end to yourTV's composite video IN jack.Connect the power cord tothe de100c and plug it into a grounded wall outlet.Put the batteries into theremote control.Save your box and packing materials. They provide the safest way to transport the digital entertainment center.Place your digital entertainment centerwhere you can easily connect it to:n your televisionn your stereo or audio/video receivern an Internet connection (wall jack orrouter connection)n a power outletCaution: Do not block the airflow vents on top of the device.The digital entertainment center's infrared receiverrequires an unobstructed signal from the remote. If you place your de100c inside a cabinet, make surethe blue window area is not blocked from view.choose a locationTUN ERTAPE AUX1AUX2CDfront of receiverCDTAPETUNERAUX1AUX2back of receivern Digital audio capability is available throughthe de100c´s OPTICAL and COAX ports.Connect one end of the audio cable to the dec100c's analog audio OUT jacks.Match red to red, white to white.Connect the other end to one set of your receiver's audio IN jacks.Match red to red, white to white.Your receiver has several sets of inputjacks. Connect the de100c to the CDinput jacks or to an AUX set of jacks.Be sure to set the receiver´s audio input to thecorresponding mode when you use your de100c:de100cstep 2:connectstep 3:check setupturn on your systemYour digital entertainmentcenter is connected.Now perform the onscreenconfiguration (see the other side).store discoverorganize playphone jacks ethernet portconnect the phone cord OR an Ethernet cableThis illustration shows a typical configuration.Your setup may differ.fi firouter

/ 1

Related manuals for HP Z558 Entertainment