HP Vectra VL6 8 Installation Manual

Also see for Vectra VL6 8: Installation guide User guide Installation guide Supplementary guide Hardware guide

3 Connecting to a Windows NT Server 3.51Windows NT Workstation Version 4.09 With “Wired to the Network” checked, click on “Next.”10 Click on “Select from List”, then click “Have Disk.”11 Set the path to “A:\NT” in the “Insert Disk” dialog box, and then insert thedisk 4 of 5 , Auto LANStreamer PCI drivers disk.(If you have an HP preloaded HDD, set path to“C:Masters\LanDrv\LNSTRM\DISK4\NT\”)12 Select “IBM Streamer Family Adapters” in the “Select OEM Option” dialogbox, and click “OK”.13 With “IBM Streamer Family Adapters” listed, click on “Next.”14 Choose the default Protocol TCP/IP, and any additional NetworkProtocols by clicking the check boxes in the “Network Protocols” dialogbox, and click “Next.”(If you do not have the required information, contact your networkadministrator)15 Click “OK” for the review of network services, and click on “Next.”16 Click on “Next” to install the selected components.17 Insert the Windows NT Workstation CD.18 In the “Windows NT Setup” enter the path to your NT files, and click onthe “Continue” button.(If you have an HP preloaded HDD, set path to “C:\I386”)19 Click on the “OK” button in the “IBM Auto LANStreamer PCI Adapter”dialog box.20 Click accordingly if you plan on using DHCP or if you plan on specifyingyour IP address manually.21 Specify your IP information or click on “Obtain an IP address from a DHCPserver” and click “OK.”22 At the “Show Bindings for” window, click on “Next.”23 Click on “Next” to start the network.24 Specify your “Domain/Workgroup Settings”, and click on “Next.”(If you do not have the required information, contact your networkadministrator)25 Verify that “Networking has been installed on this computer” and click on“Finish.”