HP V-M200 Quick Start Manual

Also see for V-M200: Safety and regulatory information

Contents

InThe HP V-M200 is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED 802.11a/b/gand 802.11n product. The Wi-Fi CERTIFIED Logo is a certification mark ofthe Wi-Fi Alliance.HP V-M200 802.11n Access Point QuickstartThis Quickstart shows you how to get started using the HP V-M200 Access Points (US J9467A, WW J9468A).After reading this Quickstart, you can visit www.hp.com/networking/support and download the HP V-M200 802.11n Access Point Management andConfiguration Guide and other documentation.Hardware overviewPackage contentsV-M200, documentation, three antennas, and power supply.Ethernet portThe V-M200 is equipped with an auto-sensing 10/100/1000 BaseT Ethernet port with RJ-45connector. The port supports Power over Ethernet (PoE) 802.3af.Radio and antennasThe V-M200 features an 802.11a/b/g/n-compliant radio. Three dual-band omni-directionalMIMO antennas are provided. Connect all three antennas and position them as illustrated fordesktop install. For wall mounting, see Mounting the V-M200 on a wall on page 2.MIMO antennasStatus lights (left to right)• Power• LAN• WLAN 2.4 GHz• WLAN 5 GHzReset buttonEthernet portAntenna connectorPower connector