UnitedLinux 1.0 Installation Notes for HPServers(This document is only available in English.)March 10, 2003IntroductionThis document was created by Hewlett-Packard for the purpose of providing you withinstallation procedures that are unique to the installation of UnitedLinux 1.0 on HPServer tc2110, HP Server tc3100, and HP Server tc4100. Review these installation notesbefore beginning installation of UnitedLinux 1.0.UnitedLinux 1.0 is the engine that powers Linux products distributed by these fourcompanies: Conectiva S.A., The SCO Group, SuSE Linux AG, and Turbolinux, Inc.Installation documentation is provided by each of these Linux distributors for releasedUnitedLinux 1.0 based products:http://www.conectiva.com/http://www.sco.com/http://www.suse.de/en/http://www.turbolinux.com/Use the installation documentation provided by these Linux distributors in combinationwith the procedures documented here to successfully install UnitedLinux 1.0 on your HPServer.Also additional information about UnitedLinux 1.0 can be found on the UnitedLinuxwebsite at:http://www.unitedlinux.comInstalling the UnitedLinux 1.0 Installation Update DiskThe UnitedLinux 1.0 Installation Update Disk must be installed if installing UnitedLinux1.0 on a server configured with more than one disk controller. If this Update Disk is notinstalled the OS will fail to boot with a kernel panic caused by the inability to mount root.An error message stating this will be displayed as well.1. Download the UnitedLinux1.0 Installation Update Disk from HP.com:http://h20000.www2.hp.com/bizsupport/TechSupport/Product.jsp?locale=en_US&prodTypeId=15351. Choose the HP Server you are installing on and thenchoose “Download Drivers and Software”.1