Menu
HP StreamSmart 410 Quick Start Manual
Also see for HP 410: User guide
      |
HP StreamSmart 410 Quick Start Guide11. ChargeCharge the unit. IMPORTANT! Before beginning, plug the StreamSmart410 into your computer with the mini USB to USB cable that came inthe package with your HP graphing calculator. You will need to chargethe unit for approximately five hours. Your computer must be runningfor charging to occur. DO NOT use the cable attached to theStreamSmart 410 for charging.I2. ConnectConnect a Fourier® sensor to the StreamSmart 410 using the sensorcable. The following experiment uses the Fourier® light intensity sensor,but you can use any sensor and still follow along with this guide. Notethe sensor cable ends have a flat side; be sure the flat side faces up onthe connection to the StreamSmart 410. Connect the StreamSmart 410cable to the HP graphing calculator. Turn on both the calculator andthe StreamSmart 410. Aim the sensor at a florescent light source. Makesure the switch on the sensor is set to C: 0 – 600 lux.Figure 1-1 |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved