Table 1 Systems Insight Display LEDs and internal health LED combinations (continued)StatusSystem power LEDHealth LEDSystems InsightDisplay LED andcolor• Processor X is unsupported.• ROM detects a failed processor during POST.Processor in socket X is in a pre-failure condition.GreenAmberOne or more DIMMs have failed.GreenRedDIMM (amber)DIMM in slot X is in a pre-failure condition.GreenAmberThe Health Driver has detected a cautionary temperaturelevel.GreenAmberOver temp (amber)The server has detected a hardware critical temperaturelevel.AmberRedThe PCI riser cage is not seated properly.GreenRedPCI riser (amber)One fan has failed or is removed.GreenAmberFan (amber)Two or more fans have failed or are removed.GreenRedOne or more of the following conditions may exist:AmberRedPower supply(amber) • Only one power supply is installed and that powersupply is in standby.• Power supply fault• System board faultOne or more of the following conditions may exist:GreenAmber• Redundant power supply is installed and only onepower supply is functional.• AC power cord is not plugged into redundant powersupply.• Redundant power supply fault• Power supply mismatch at POST or power supplymismatch through hot-plug additionStandbyAmber—Power cap (off)Waiting for powerFlashing green—Power cap (green)Power is available.Green—Software componentsWindows Storage Server 2012 Standard Edition comes preinstalled and activated on the HPStoreEasy 1000 Storage. The storage system configuration also includes the HP Initial ConfigurationTasks window, Windows Server Manager, and HP StoreEasy tools, which are used to set up andmanage your storage system.Software components 19
