HP SignagePlayer mp8000r Maintenance And Service Manual

Also see for SignagePlayer mp8000r: Illustrated Parts and Service Map Getting started guide

Contents

NOTE: On systems running Microsoft Windows Vista or Microsoft Windows 7, if you are notlogged in with an account that has Administrator privileges, right-click the icon and then selectRun as Administrator.Choose one of the deployment options: USB Format or Deployment. Each option is described below.NOTE: During the restore process, the SignagePlayer drive is reformatted and all data on it is erasedbefore the system image is copied to it. To prevent loss of data, be sure that you have saved any user-created data from the flash drive.During the first restart of the SignagePlayer following the restore process, there may be a delay ofapproximately 5-10 minutes to unbundle the software before the Windows desktop is displayed.Formatting a USB Flash Device1. Connect your USB flash device. Ensure that only one USB flash device is connected to the system.2. Click USB Format.3. Select the USB drive from the list, using the up and down arrows to display the correct drive letter.(If the USB drive does not appear in the list, click Update Drives, then scroll through the listagain.)NOTE: During the next step, the USB drive is reformatted and all data on it is erased before thebootable image is copied to it. To prevent loss of data, be sure that you have saved any data fromthe USB drive to another drive.6 Chapter 2 HP SignagePlayer Imaging Tool