HP SN6000 Quickstart Installation Instructions

Also see for StorageWorks SN6000: Update Installation and reference guide Cli guide Installation and reference guide Reference guide

Contents

installation instructions

Page 1*5697-1309*HP Part Number: 5697-1309Published: November 2011Edition: 2OverviewCongratulations on your purchase of the HP SN6000Fibre Channel Switch power supply. This documentprovides procedures for replacing SN6000 FibreChannel Switch power supply models SBPSFANBF,SBPSFANFB, SBPSFAN2BF, and SBPSFAN2F. Theseinstructions are also available in the HP SN6000Fibre Channel Switch Installation and ReferenceGuide.Supported switchesThis power supply is for the HP SN6000 Dual PowerSupply Fibre Channel Switch.Related documentationFor the latest documentation for the HP SN6000 FibreChannel Switch, see the HP websitehttp://www.hp.com/go/sn6000.Before you beginCAUTION:• Both power supplies must have the sameair flow direction to prevent the switchfrom overheating.• To avoid overheating, do not operate theswitch with one power supply any longerthan necessary.• This is a Class A product. In a domesticenvironment, this product may causeradio interference, in which case, the usermay be required to take adequatemeasures.Collect the required itemsRequired tools:• Cross-head screwdriver, medium© Copyright 2011 Hewlett-Packard Development Company, L.P.Printed in the U.S.HP SN6000Fibre Channel SwitchPower Supply Quick StartInstallation Instructions

/ 2

Related manuals for HP StorageWorks SN6000