HP R100 Series Quick Start Manual

HP R100-Series Wireless VPN Routers QuickstartThis Quickstart shows you how to install and get started using the HP R110 802.11n Wireless VPN Router and HP R120 802.11ac Wireless VPN Router, hereafterreferred to as the HP R110 and HP R120. (See Products list on page 6 for part numbers.)The latest documentation, including the HP R100-Series Wireless VPN Routers Configuration/Administration Guide, is available at www.hp.com/support/manuals.The HP R100-Series routers are all-in-one networking devices incorporating an IPv6-capable router, gigabit LAN switch, 802.11 wireless access point, SPI firewalland VPN encryption technology. The HP R110 provides a single radio dual band 802.11n access point and aggregate VPN capacity of 30 Mbps. The HP R120provides a dual-radio 802.11ac access point and aggregate VPN performance of up to 200 Mbps.Hardware overview81245679103 11Rear view1: Power jack 5: WAN port2: Power On/Off button 6: Reset button3: Wi-Fi On/Off button 7: WPS button4: LAN ports 1-4Front view8: Power LED9: System and port status LEDs10: USB port LED11: USB 2.0 portThe HP R110 is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED802.11a/b/g/n product. The HP R120 is a Wi-Fi Allianceauthorized Wi-Fi CERTIFIED 802.11a/b/g/n/ac product. The Wi-FiCERTIFIED Logo is a certification mark of the Wi-Fi Alliance.