HP Pavilion 14 Maintenance And Service Manual

Also see for Pavilion 14: Technical white paper Maintenance and service guide Maintenance and service guide Maintenance and service guide Maintenance and service guide

Table 10-1 Power cord requirements for specific countries and regions (continued)Country/region Accredited agency Applicable note numberIndia BIS 1Israel SII 1Italy IMQ 1Japan JIS 3Netherlands KEMA 1New Zealand SANZ 1Norway NEMKO 1People's Republic of China CCC 4Saudi Arabia SASO 7Singapore PSB 1South Africa SABS 1South Korea KTL 5Sweden SEMKO 1Switzerland SEV 1Taiwan BSMI 6Thailand TISI 1United Kingdom ASTA 1United States UL 21. The flexible cord must be Type HO5VV-F, three-conductor, 0.75 mm² conductor size. Power cord set fittings (appliance couplerand wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will beused.2. The flexible cord must be Type SVT/SJT or equivalent, No. 18 AWG, three-conductor. The wall plug must be a two-pole groundingtype with a NEMA 5-15P (15 A, 125 V ac) or NEMA 6-15P (15 A, 250 V ac) configuration. CSA or C-UL mark. UL file number must beon each element.3. The appliance coupler, flexible cord, and wall plug must bear a T mark and registration number in accordance with the JapaneseDentori Law. The flexible cord must be Type VCTF, three-conductor, 0.75 mm² or 1.25 mm² conductor size. The wall plug must bea two-pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V ac) configuration.4. The flexible cord must be Type RVV, three-conductor, 0.75 mm² conductor size. Power cord set fittings (appliance coupler andwall plug) must bear the CCC certification mark.5. The flexible cord must be Type H05VV-F three-conductor, 0.75 mm² conductor size. KTL logo and individual approval numbermust be on each element. Approval number and logo must be printed on a flag label.6. The flexible cord must be Type HVCTF three-conductor, 1.25 mm² conductor size. Power cord set fittings (appliance coupler,cable, and wall plug) must bear the BSMI certification mark.7. For 127 V ac, the flexible cord must be Type SVT or SJT 3-conductor, 18 AWG, with plug NEMA 5-15P (15 A, 125 V ac), with UL andCSA or C-UL marks. For 240 V ac, the flexible cord must be Type H05VV-F three-conductor, 0.75 mm² or 1.00 mm² conductor size,with plug BS 1363/A with BSI or ASTA marks.Requirements for specific countries and regions 71