Top coverNOTE: The top cover spare part kit includes the TouchPad and TouchPad cable.Description Spare part numberIn black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models 663677-001In charcoal finish for use only on HP Mini 210 computer models 650747-001In crimson red finish for use only on HP Mini 210 computer models 650752-001In luminous rose finish for use only on HP Mini 210 computer models 650751-001In ocean drive finish for use only on HP Mini 210 computer models 650748-001In Pacific blue finish for use only on HP Mini 110 computer models 658515-001In Sonora red finish for use only on HP Mini 110 computer models 658513-001In sweet purple finish for use only on HP Mini 210 computer models 654204-001Before removing the top cover, follow these steps:1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turnthe computer on, and then shut it down through the operating system.2. Disconnect all external devices connected to the computer.3. Disconnect the power from the computer by first unplugging the power cord from the AC outletand then unplugging the AC adapter from the computer.4. Remove the battery (see Battery on page 50).5. Remove the service cover (see WLAN module on page 52).6. Remove the keyboard (see Keyboard on page 61).NOTE: When replacing the top cover, be sure to remove the speakers from the defective top coverand install them on the replacement top cover. See Speakers on page 73 for speaker removal andreplacement instructions.Remove the top cover:1. Close the computer.2. Turn the computer upside down, with the front toward you.Component replacement procedures 67Downloaded from LpManual.com Manuals