HP LC3760N User Manual

Also see for LC3760N: Datasheet

Contents

10 HP LCD HDTV User’s GuideConnect the input source to the TV according to thetype of connection:■ Antenna or basic cable (TV cable or satellite)without using a set-top box; see “Connecting thecable TV or the air antenna” on page 10.■ Cable or satellite with a separate set-top box; see“Connecting cable or satellite with a set-top box”on page 10.About the Emergency Alert System (EAS)■ In the case of a national emergency, naturaldisaster, or other emergency situation, an EASmessage broadcasts. When this unit receives anEAS message, if the level of emergency iscomparatively low, an alert text message displayson screen. If the level of emergency is high, thereceiver is forced-tuned to a details channel.■ Alert text messages display, and forced tuningoccurs, even during paid programming. Evenwhen forced tuning is active, the user can stillchange the channel.■ If the unit is forced-tuned to a channel that hasbeen blocked by Parental Control, the ParentalControl setting is given priority, and the EASmessage is not broadcast.■ EAS messages may be broadcast not only throughdigital cable, but also through analog cable orover-the-air analog transmission. EAS alertmessages broadcasted through cable are notreceived on this TV.Connecting the cable TV or theair antennaUse standard 75-ohm coaxial cable to connect aground antenna or cable TV input source to the TV. Useshielded coaxial cable to reduce radio frequency (RF)interference.Optional equipment, cable TV service, and all cablesare sold separately.1 Connect the input source coaxial cable to theAnt/Cable connector on the back of the TV.2 Connect power to the TV; see “Connecting powerto the TV” on page 16.3 Turn on the TV; see “Turning the TV On and Off(Standby)” on page 17.Connecting cable or satellitewith a set-top boxConnecting your TV directly to the audio and videooutput of your set-top box assures a more vivid pictureand enhances your viewing enjoyment.Optional equipment and all cables are sold separately.You can connect a digital TV set-top box (air or cable)and other audiovisual equipment by using:■ Component video and audio cables connected toInput 1 or Input 2 connectors on the TV.■ S-video and audio cables connected to Input 3connectors on the TV.n■ To connect an external sound system, see“Connecting an external sound system”on page 15.■ To connect a device that records TV, see“Connecting a VCR for recording” onpage 15.cCAUTION: Unplug power for the TV and allconnected components before connectingthe antenna or cable.