Model:HSA-T001SConnecting to Cortana1 Install Cortana Device Setup from the Windows Store or theCortana app from the Google Play Store or Apple App Store.2 Connect the USB cable to the AC adapter 1, and then connect theAC adapter to an AC outlet 2. Connect the other end of the cable tothe micro-USB port on the speaker 3.2133 When you hear the voice prompt, run Cortana Device Setup orthe Cortana app on your device, and then say or enter Setup myspeaker to connect the speaker to your Wi-Fi network.You must create a Microsoft account.4 After the setup is complete, say "Hey Cortana" to activate Cortana,and then say a voice command after the speaker light turns on.Connecting to BluetoothDEVICESHP SpeakerORSay "Hey Cortana," and then say, "Pair to my Bluetooth device."Components4 m(13.1')4 m(13.1')RMN/型號/型号: HSA-T001S© Copyright 2017 HP Development Company, L.P.Bluetooth is a trademark owned by its proprietor and used by HP Inc. under license. Cortana and Skypeare either registered trademarks or trademarks of Microsoft Corporation in the United States and/or othercountries. The Spotify Software is subject to third party licenses found here: www.spotify.com/connect/third-party-licenses.The information contained herein is subject to change without notice. The only warranties for HP productsand services are set forth in the express warranty statements accompanying such products and services.Nothing herein should be construed as constituting an additional warranty. HP shall not be liable fortechnical or editorial errors or omissions contained herein.First Edition: December 20171 Insert a paper clip and press for five seconds to restore factorysettings.2 On: Speaker is active.Rippling: The speaker is in pairing mode.3 Press to start Bluetooth® pairing, answer or end a call, pausemusic, or turn off an alarm. Press twice to ignore a call. The actionperformed depends on the active function, such as Skype® orSpotify Connect.Press for three seconds to activate Cortana.4 Press to mute or unmute the microphone.On: The microphones are muted.34====12Replace this box with PI statement as per spec.Replace this box with PI statement as per spec.Replace this box with PI statement as per spec.Replace this box with PI statement as per spec.*L05318-B21*L05318-B21Hello.How can I help you?=<1s=>1s