NoticeThe information contained in this document is subject to changewithout notice.Hewlett-Packard makes no warranty of any kind withregard to this material, including, but not limited to, theimplied warranties of merchantability and fitness for aparticular purpose. Hewlett-Packard shall not be liable forerrors contained herein or for incidental or consequentialdamages in connection with the furnishing, performance, or useof this material.Hewlett-Packard assumes no responsibility for the use orreliability of its software on equipment that is not furnished byHewlett-Packard.This document contains proprietary information that is protectedby copyright. All rights are reserved. No part of this documentmay be photocopied, reproduced, or translated to anotherlanguage without the prior written consent of Hewlett-PackardCompany.Hewlett-Packard CompanyNetwork Server DivisionP.O. Box 58059, Technical MarketingSanta Clara, CA 95052-8059 USA© Copyright 1998, Hewlett-Packard CompanyLH 3InstallationRoad MapHP NetServerInstallation Overview,,,Configure ISA non-Plug-and-Play board (if installed)Select Network Operating System (NOS)Configure Integrated Remote AssistantFirst: Install Hardware Using this Road MapSecond: Configure Hardware,, Refer to theInstall HP TopToolsHP NetServer Remote Administrator GuideFourth: Install Server Management SoftwareThird: Install NOS,,For certain versions of Novell NetWare and MS Windows NT, you may use theHP automated installation processFor NOSs using a vendor-installation process, first create a NOS driversdiskette, and view and print HP NOS Installation Instructions5967-4216Printed on recycled paper.Printed in June 1998,,,,,,,,Verify contentsObtain HP Navigator CD-ROM release historyView the Readme FileTest the system hardware using Diagnostic Assistant (optional)Install Information AssistantVisit Order Assistant (optional)Install all hardware accessoriesVerify installed hardware accessories (optional)