HP D7171A - NetServer - LPr Configuration Manual

Also see for D5970A - NetServer - LCII: Installation guide Installation guide Specification sheet Installation guide Installation guide

Contents

1HP NetServer LX Pro and LXe ProwithA3661B High Availability Disk Array Model 30/FCCluster Configuration Guide25 November, 1998IntroductionThis document defines the supported HP NetServer LX Pro, LXe Pro and A3661B High Availability DiskArray Model 30/FC (LX, LXe/Model 30-FC) configurations for Microsoft Cluster Server. Theseconfigurations minimize single points of failure, provide maximum availability, and have been certified byHewlett-Packard and Microsoft. This guide is prescriptive; it describes the configurations supported by HP.Any configuration not expressly allowed by this guide will not be supported by HP.What’s Defined• Cluster• SPUs• LANs• Local Storage• Shared Storage• Shared Storage CablingClusterType of SPUs HP NetServer LX Pro Model 1 or HP NetServer LXe Pro Model 1Each node must be the same model SPU, but may have different clockspeeds, main memory and cache sizes.Number of nodes 2Shared Storage See Shared Storage below.LANs:Client LAN See Client LAN below.Intra-cluster See Intra-cluster LAN below.Power source Direct from power mains, power conditioner or uninterruptable powersupply (UPS) using any power conditioner or UPS.System software:Navigator version G.00.85 or laterOperating System Microsoft Windows NT Server 4.0, Enterprise Edition or later.Service pack SP3 and hotfix “clusfixi”, or later