Menu
HP CodeMaster XL+ M1722A User Manual
                                                                                                          |
DefibrillatingDefibrillating a Patient2-71 Attach the internal paddles adaptor cable (HP M1740A/B) to the paddle connec-tor on the front of the defibrillator.2 Slide the paddle connector lock towards the front of the defibrillator to securethe cable.3 Select correct paddle set size from Table 2-1, “Switchless Internal PaddlesSelection,” on page 2-8.4 Attach the internal paddles set to the internal paddles adaptor cable. The padsare correctly connected when the locking ring is twisted, locking the ears of theconnector to the adaptor cable.Failure to correctly connect the internal paddles to the adaptorcable can result in a failure to deliver energy to the patient.5 Set the Energy Select control to the desired energy.If the energy switch is set to a level greater than 50 joules, 50J MAXIMUM will bedisplayed. If is pressed, the unit will only charge to 50 joules.For safety and sterility when using the paddles, do not touch thepaddle beyond the fingerguard on the handle.6 Apply the internal paddles.7 Press .8 Wait for the Charge Done indicators.9 Press both Shock buttons at once to defibrillate. The Shock buttons are onthe cable connector housing.WARNINGWARNING ChargeWARNINGCharge |
Related manuals for HP CodeMaster XL+ M1722A
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved