HP CD-ROM User Manual

111. Connect one end of the car charger to the USB connector of thecamcorder. USB port input: DC 5V / 1A.2. Plug the other end of the car charger to the cigarette lightersocket of your vehicle. Once the vehicle engine is started, thecamcorder automatically powers on. Car charger input: DC 12 /24V.2.4 Initial SettingsBefore using the camcorder, we recommend you setup the correctDate and Time.Note: Please note that if you press the button during recording, the systemwill stop recording and enter OSD menu. Make sure the recording is already stoppedthen continue operating the menu.2.4.1 Set the Date / TimeTo set the correct date and time, do the following:1. Press the button to enter the OSD menu.2. Press the or button to select Date / Time, and thenpress the button for entering function menu.3. Press the or button to adjust the value, and thenpress the button to set the next field.4. Repeat step 3 until the date and time setting is completed.Note: To ensure the accuracy of the video file time, please reset the date and timewhen not in use over 7 days.