HP AG072A Installation Instructions Manual

Also see for AG072A: Quickspecs

Contents

installation instructions

HP 1U RackmountKeyboard with USBInstallation Instructions© Copyright 2006 Hewlett-Packard Development Company, L.P.The information contained herein is subject to change without notice. Theonly warranties for HP products and services are set forth in the expresswarranty statements accompanying such products and services. Nothingherein should be construed as constituting an additional warranty. HP shallnot be liable for technical or editorial errors or omissions contained herein.January 2006 (First Edition)Part Number 408569-001About this deviceThe HP 1U Rackmount Keyboard with USB is a rack-mountable 1U keyboard with touchpad.NOTE: 1U equals 4.5 cm (1.8 in).The 1U rackmount keyboard is mounted on rails with spaceavailable to add a 1U KVM switch behind the unit. The 1Urackmount keyboard can be used with all HP 5000 and10000 Series racks.Kit contentsThe kit contains the following:• HP 1U Rackmount Keyboard with USB (1)• M6 screws (4)• 6-32 screws (5)• HP 1U Adjustable Toolless Rails (2)• Cable management arm with brace rail (1)• Lock plates (2)• USB cables (2)• PS/2 cables (2)• USB cable labels (4)This kit contains extra hardware for your convenience.Rack warningWARNING: To reduce the risk of personalinjury or damage to the equipment, besure that:• The leveling feet are extended to thefloor.• The full weight of the rack rests on theleveling feet.• The stabilizing feet are attached to therack if it is a single-rack installation.• The racks are coupled together inmultiple-rack installations.• Only one component is extended at atime. A rack may become unstable ifmore than one component is extendedfor any reason.

/ 3

Related manuals for HP AG072A