HP 8542E Installation And Verification Manual

Also see for 85422E: User guide

Contents

1. Frequency Readout and Marker Count Accuracy1. Frequency Readout and Marker Count AccuracyThe frequency readout accuracy of the receiver is tested with aninput signal of known frequency at the RF INPUT if testing thereceiver RF section, or INPUT 2 if testing the EMI receiver. By usingthe same frequency standard for the receiver and the synthesizedsweeper, the frequency reference error is eliminated.Equipment Required Synthesized sweeperAdapter, Type N (f) to APC 3.5 (m)Adapter, APC 3.5 (f) to APC 3.5 (f)Cable, APC 3.5, 91 cm (36 in)Cable, BNC, 122 cm (48 in)Figure 2-1. Frequency Readout Accuracy Test SetupOperation Veri cation 2-7