Appendix B: Camera dock 75Unloading images to acomputer using the dockNOTE If you are using a Macintosh computer, switch thecamera to Disk Drive in the USB Configuration menufound in the Setup menu.1 Check that the HP Camera Dock is connected to yourcomputer.2 Place the camera in the Camera Dock. It will turn onautomatically, and a dock intro screen will appear.3 Press the button on the dock to start the unloadprocess. The HP Image Unload software will launch on yourcomputer, and the images in the camera will automaticallyunload to the computer. If there were any images on thecamera that had been selected in the Share menu forprinting or e-mail, those actions are started after the imageshave been unloaded to the computer.4 The camera will return to the dock intro screen when yourimages have been saved and shared. You can now take thecamera out of the dock, or leave it there to recharge thecamera batteries.
