HP 510 Maintenance And Service Manual

Also see for 510 - Notebook PC: MultiBoot User Guide Network guide User guide Setup guide User guide

Contents

In Computer Setup, the following shortcuts are available:● To change the language, press f2.● To view navigation information, press f1.● To close open dialog boxes and return to the main Computer Setup screen esc.2. Select the Files, Security, Diagnostics, or System Configuration menu.3. To exit Computer Setup, choose one of the following methods:● To exit Computer Setup without saving your preferences, use the arrow keys to select File >Ignore Changes and Exit. Then follow the instructions on the screen.● To save your preferences and exit Computer Setup, use the arrow keys to select File > SaveChanges and Exit. Then follow the instructions on the screen.Your preferences go into effect when the computer restarts.Computer Setup defaultsTo return all settings in Computer Setup to the values that were set at the factory:1. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the"F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.In Computer Setup, the following shortcuts are available:● To change the language, press f2.● To view navigation information, press f1.● To close open dialog boxes and return to the main Computer Setup screen, press esc.2. Use the arrow keys to select File > Restore defaults, and then press enter.3. When the confirmation dialog box opens, press f10.4. Select the Restore defaults check box, and then press enter.5. To confirm the restoration, press f10.6. To save your preferences and exit Computer Setup, use the arrow keys to select File > SaveChanges and Exit. Then follow the instructions on the screen.Your preferences go into effect when the computer restarts.NOTE Your password and security settings are not changed when you restore the factorydefault settings.66 Chapter 6 Computer Setup ENWW