HP 37718A/37719ACommunicationsPerformance AnalyzerInstallation andVerificationManual

HP 37718A Installation And Verification Manual

Setting DSn Transmit Interface

Setting SONET Transmit Interface

Setting Jitter Transmit Interface

Setting Wander Transmit Interface

Setting SONET THRU Mode

Using Smart Test

Setting DSn Receive Interface

Setting SONET Receive Interface

Setting Jitter Receive Interface

Setting Extended Jitter Receive Interface

Setting Wander Receive Interface

Using Transmit Overhead Setup

Using Receive Overhead Monitor

Setting Overhead Trace Messages

Generating Overhead Sequences

Using Receive Overhead Capture

Adding Frequency Offset to SONET Signal

Adding Frequency Offset to the DSn Signal

Setting up Signaling Bits

Setting Transmit Structured Payload/Test Signal

Setting Receive Structured Payload/Test Signal

Setting Transmit N x 64 kb/s/N x 56 kb/s Structured Payload/Test Signal

Setting Receive N x 64 kb/s/N x 56 kb/s Structured Payload/Test Signal

Inserting an External DSn Payload/Test Signal

Dropping an External Payload/Test Signal

Adding Errors & Alarms at the SONET Interface

Adding Errors & Alarms to the DSn Interface/DSn Payload

Using FEAC Codes

Setting DSn Spare Bits

Adding Pointer Adjustments

Using Pointer Graph Test Function

Stressing Optical Clock Recovery Circuits

Generating Automatic Protection Switch Messages

Inserting & Dropping Data Communications Channel

Using Overhead BER Test Function

Test Timing

Making SONET Analysis Measurements

Making DSn Analysis Measurements

Measuring Frequency

Measuring Optical Power

Measuring Round Trip Delay

Monitoring Signaling Bits

Measuring Service Disruption Time

Performing a SONET Tributary Scan

Performing an SONET Alarm Scan

Performing a DSn Alarm Scan

Measuring Jitter

Measuring Extended Jitter

Measuring Wander

Measuring Jitter Tolerance

Measuring Jitter Transfer

Saving Graphics Results to Instrument Store

Recalling Stored Graph Results

Viewing the Bar Graph Display

Viewing the Graphics Error and Alarm Summaries

Logging Graph Displays

Logging Results

Logging on Demand

Logging Jitter Tolerance Results

Logging Jitter Transfer Results

Logging Results to Parallel (Centronics) Printer

Logging Results to HP-IB Printer

Logging Results to Internal Printer

Logging Results to RS-232-C Printer

Printing Results from Disk

Connecting an HP 850C DeskJet Printer to a Parallel Port

Changing Internal Printer Paper

Cleaning Internal Printer Print Head

Storing Conﬁgurations in Instrument Store

Titling Conﬁguration in Instrument Store

Recalling Conﬁgurations from Instrument Store

Formatting a Disk

Labeling a Disk

Managing Files and Directories on Disk

Saving Graphics Results to Disk

Saving Data Logging to Disk

Saving Conﬁgurations to Disk

Recalling Conﬁguration from Disk

Recalling Graphics Results from Disk

Copying Conﬁguration from Instrument Store to Disk

Copying Conﬁguration from Disk to Instrument Store

Copying Graphics Results from Instrument Store to Disk

Coupling Transmit and Receive Settings

Setting Time & Date

Enabling Keyboard Lock

Enabling Beep on Received Error

Suspending Test on Signal Loss

Setting Error Threshold Indication

Setting Screen Brightness and Color

Dumping Display to Disk

Running Self Test

etsi/ansi terminology

ETSI/ANSI Conversion and Equivalent Terms

37718A OmniBER 718

Warranty

Responsibilities of the Customer

Certiﬁcation

Instruments Covered By Manual

Weight and Dimensions

Safety Precautions for the Operator

Safety Symbols

Operators Maintenance

Power Supply Fuse Replacement

Statement of Compliance

Electromagnetic Compatibility

general information

Initial Inspection

Operating Environment

Preparation for Use

Connecting to the Power Supply

Connecting to the Network

Optical Interface Connectors

Connecting Accessories

Hewlett-Packard Interface Bus

Additional Precautions for Service Engineers

Front Panel Soft Recovery (Cold Start)

Introduction

Recall Default Settings

Self Test

PDH/DSn Internal Transmitter Clock Accuracy & Offset

E1 (2.048Mb/s) Frequency Accuracy

E2 (8.448Mb/s) Frequency Accuracy

E4 (139.264Mb/s) Frequency Accuracy

DS3 (44.736Mb/s) Frequency Accuracy

PDH/DSn Transmitter Output

Equipment Required

Procedure - 34.368 Mb/s

Procedure - 8.448 Mb/s

Procedure - 2.048 Mb/s

Procedure - DSX-3

Procedure - DSX-1

PDH/DSn Receiver Equalization

Procedure

PDH/DSn Receiver Monitor Levels

External Mux/Demux

PDH/DSn Frequency Measurement and Looped Clock

SDH/SONET Transmitter Clock Accuracy

Speciﬁcations

SDH/SONET Frequency Offsets

STM-0/STS-1 Transmitter Output Waveshape

STM-1/STS-3 Transmitter Output Waveshape

SDH/SONET Receiver Equalization

SDH/SONET Receiver Monitor Levels

Multirate Optical Interfaces

Description

Jitter Performance Test Record (options 204, 205 &

Self Tests

All Tests (test time - up to 1 Hour depending on options)

PDH Test (test time- approximately 20 minutes)

BER Test (test time- approximately 20 minutes)

JITTER Test (test time- approximately 20 minutes)

Option Structure/Module Conﬁguration

37719A

HP 37718A Installation And Verification Manual

Product

Learn More

Legal