HP 3000 II Series Manual

Also see for 3000 III Series: Manual

1.II.INTRODUCTI ONThe Stand-Alone HP 300036A/B Multiplexer Channel Test verifies the functionallevel operation of the Multiplexer Channel Board. The tested area includesOrder RAr-1, Order Register, Address RAN, Address Register, State RAn, St at eRegister, and the SIO related to the multiplexer. A detailed description ofthe test is available in the subsequent sections.MINI-OPERATING INSTRUCTIONSA. Operations1. Cold Load Diagnostic File # (associated with D422A) from non-cpuCold Load Tape .2. Respond to Speed-Sense by asserting "CRII at the Console.3. Respond to the dialogue at the Console.B. Switch-Register Options-S\4ITCH- - FUNCTION IF SET-********** *******************o SELECT EXTERNAL SWITCH REGISTER1 SET TO CHANGE SECTION SELECTION REGISTER2 SET TO BYPASS SECTION (AREG)3 SET TO BYPASS SECTION (OREG)4 SET TO BYPASS SIOTEST SECTION (STEPS 63 AND 68)5 LOOP CURREIH SECTION6 SET TO BYPASS SIOTEST (STEPS 75 THRU 78)7 OUTPUT TO LINE PRINTER (IF CONFIGURED IN SOUP)8 SPARE9 SUPPRESS NON ERROR MESSAGES10 SUPPRESS ERROR MESSAGES11 LOOP ON LAST STEP12 . HALT ON ERROR13 HALT AT END OF STEP14 HALT AT END OF SECTION15 HALT AFTER A COMPLETE PROGRAM CYCLEC. Section Switch - Register OptionsBIT # SECTION*********** *********o123456789101112131415RE-CONFIGURE10RESARADDRARDATAARCPPORADDRORDATAORCPAREGOREGNSGP1NSGP2NSGP3NSGP4STPP.RS10TEST 1