HP 289166-40B User Manual

Contents

• Manual is converted to Network Fault Tolerance Only (NFT).SmartSwitch is converted to Network Fault Tolerance Only with Preference Order.•rimaryNic attribute determines which team memberaryRanking attribute.Scripnfiguration script file to duplicaterce ProLiant BL/ML/DL server on a target server.is indows operating systems:eConfiguration Utility (NCU) must be closed.the SmartStart Scripting Toolkit (SSST)usingource server.2.3.e script file, HP recommends that you run CQNICCMD/ P to check the syntax of theors and warnings. The default location of the log file isntax of the /P option is cqniccmd5. ax.6.he SmartStart Scripting Toolkit (SSST), refer to the documentation includedbe downloaded from http://www.hp.com/servers/proliantessentials• For Smart Switch Teams, the existing PreferredPshould be more highly ranked than others within the PreferredPrimAll other unspecified parameters use their defaults.ting application (CQNICCMD)CQNICCMD is a Windows utility that processes a network adapter cothe adapter teaming configuration of a souTh utility is supported on the following W• Windows Server 2008• Windows Server 2008 x64 Editions• Windows Server 2003• Windows Server 2003 x64 EditionsRun the utility from the command line in a Command Prompt window, from the Run option on thWindows Start menu, or from a Windows command file. To execute the CQNICCMD utility from thecommand line, the HP NetworkHP recommends that you use this application as part ofdeployment. However, the application can be used outside of this environment. Follow these steps whenthe scripting application.1. Configure adapter teaming on the sGenerate a script file on the source server by clicking Save in the HP NCU user interface or runningCQNICCMD /S in the Command Line utility.Modify the script file as necessary.If you modify thmodified file and check the log file for err\cpqsystem\log\cpqteam.log on the system drive. The sy/p4. Install the HP NCU on the target system.Run the Command Line utility with the following syntcqniccmd /cCheck the log file for errors and warnings. The default location of the log file is\cpqsystem\log\cpqteam.log on the system drive.For use of this utility with twith SSST. The SSST can(http://www.hp.com/servers/proliantessentials).Comm CMD [[F/] /C] [/D] [/L ] [/P ]ilename>] [/?]Only one of the following configuration options can be specified at a time:and line syntaxCQNIC[/SScripting 7