HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard Drive Quick Start Instructions

Also see for StorageWorks 2000fc: Technology brief Family guide Specification sheet User guide Cli reference guide

Page 1*5697-0082*Congratulations on your purchase of the 8GbSimple SAN Connection Kit. This documentprovides procedures for installing the kitcomponents, including the HP StorageWorks8/20q Fibre Channel Switch, the host busadapters (HBAs), and the HP StorageWorksSimple SAN Connection Manager (Simple SANConnection Manager) software bundle on aWindows or Linux system.Verify contents and requirements1. Verify the package contents.The 8Gb Simple SAN Connection Kit is shipped with thefollowing items and quantities:• One quick start instructions (this document)• One Read-Me-First document• One End User License Agreement (EULA)• One HP StorageWorks 8/20q Fibre Channel SwitchRack-Mount Kit quick start installation instructions• One HP StorageWorks Simple SAN Connection Managersoftware CD, which includes HP Enterprise Virtual Array (EVA)Management, Modular Smart Array (MSA) Management,and other related software components• One HP StorageWorks 8/20q Fibre Channel Switch• One HP StorageWorks 8/20q Fibre Channel SwitchRack-Mount Kit• Four rubber mounting feet for the HP StorageWorks 8/20qFibre Channel Switch (for desktop placement, if you are notusing the rack-mount kit)• Ten 8 Gb shortwave fiber optic transceivers• Six 5m LC-LC Multi-Mode Fibre Channel (FC) cables• Four 8 Gb HP StorageWorks 81Q PCI Express (PCIe) FibreChannel HBAs (PCIe x8 physical connector)• Four low-profile HBA mounting brackets• One standard power cord• One HP Power Distribution Unit (PDU) power cable• One serial cable2. Verify that the server running your management software(management station) meets the following minimum requirementsfor supporting the software (including Simple SAN ConnectionManager and other HP software):• Operating system:• Windows Server 2003 R2 x64/x86 with SP2 andMicrosoft hotfix QFE932755 (updated Storport storagedriver). The update is available on the Microsoft website:http://support.microsoft.com/kb/932755.• Windows Server 2008 x64/x86 with SP1 or later.• 512 MB of memory• 200 MB of disk space• One 2.0 GHz processor• One CD-ROM drive• One Ethernet port• One or more PCIe slots for the HP StorageWorks 81Q PCIeFC HBA (or other supported QLogic FC HBA)• Java Runtime Environment (JRE) x86 1.5 or later© Copyright 2008–2009 Hewlett-Packard Development Company,L.P.Fifth edition: July 2009Product names mentioned herein may be trademarks of theirrespective companies.The information in this document is subject to change without notice.Microsoft and Windows are U.S. registered trademarks of MicrosoftCorporation.Java is a U.S. trademark of Sun Microsystems, Inc.Printed in the U.S.www.hp.comHP StorageWorks8Gb Simple SAN ConnectionKit quick start instructions