15010. Set the maximum number ofdays and maximum numberof times that a user can log inafter the password expires.password-controlexpired-user-login delay delaytimes timesOptional.By default, a user can log in threetimes within 30 days after thepassword expires.11. Set the authentication timeouttime.password-controlauthentication-timeoutauthentication-timeoutOptional.The default setting is 60 seconds.12. Set the maximum account idletime.password-control login idle-timeidle-timeOptional.The default setting is 90 days.Setting user group password control parametersStep Command Remarks1. Enter system view. system-view N/A2. Create a user group and enteruser group view. user-group group-name N/A3. Configure the passwordaging time for the user group. password-control aging aging-timeOptional.By default, the aging time of theuser group is the same as theglobal password aging time.4. Configure the minimumpassword length for the usergroup.password-control length lengthOptional.By default, the minimum passwordlength of the user group is the sameas the global minimum passwordlength.5. Configure the passwordcomposition policy for theuser group.password-control compositiontype-number type-number[ type-length type-length ]Optional.By default, the passwordcomposition policy of the usergroup is the same as the globalpassword composition policy.Setting local user password control parametersStep Command Remarks1. Enter system view. system-view N/A2. Create a local user and enterlocal user view. local-user user-name N/A3. Configure the passwordaging time for the local user. password-control aging aging-timeOptional.By default, the setting equals thatfor the user group to which thelocal user belongs. If no aging timeis configured for the user group,the global setting applies to thelocal user.
