HP 1105 Maintenance And Service Manual

Also see for 1105: User guide Illustrated parts & service map

Contents

Optical Drive Cables and ConnectorDescription Spare part numberOptical drive connector cable 669998-001The optical drive connector is secured with two screws and has two cables that connect to the systemboard.To remove the optical drive connector:1. Prepare the computer for disassembly (see Preparing to Disassemble the Computeron page 37).2. Remove the rear cover (see Rear Cover on page 38).3. Remove the optical drive (see Optical Drive on page 55).4. Remove two screws that secure the optical drive connector (1) to the computer.5. Disconnect the optical drive power and data cables (2) from the system board.NOTE: Be careful not to damage the cable when disconnecting it from the board. Do not pullon the wires.Optical Drive Cables and Connector 57