Menu
HASSEB AUDIO OVER ETHERNET PRO Instruction Manual
     |
October20, 2018HASSEB AUDIO OVER ETHERNET PRO INSTRUCTIONS MANUALVERSION 1.0hasseb Inc.info@hasseb.fiwww.hasseb.fiHASSEB AUDIO OVER ETHERNET PROhasseb Audio over Ethernet Pro is an easy to use and portable device used tosend and receive lossless, realtime audio using Ethenet network. The device iscompatible with AES67 standard and can be used as a standalone device ortogether with other AES67 compatible devices.The device operates as a simultaneous stream transmitter and receiver. Thedevice can transmit and receive analog audio signals using a standard 3.5 mmaudio plugs or digital audio signal using optical Toslink connectors. The device isconfigured using a web user interface and mDNS (multicast Domain NameSystem) protocol is supported to easily find the device IP addresses from thenetwork. For professional grade network audio systems PTP (Precision TimeProtocol) based time synchronization is required. The device can act as IEEE1588InstallationThe device is powered through the USB connector using a 5 volts USB powersupply.DHCP (Dynamic Host Configuration Protocol) support is enabled by default, sothe device will assign an IP address automatically. All Ravenna devices and theirnames and IP addresses connected to the network can be found using anysoftware, capable of searching the network for mDNS supported devices. If youhave normal domestic network router, the web user interface of you router canalso be used to find the IP addresses of the connected devices.WEB USER INTERFACEThe device can be configured for network, audio, and stream settings using anyweb browser. Writing the IP address of the device to the address field of yourweb browser, the configuration page will be opened. You can find the IP addressof the device from your network router or using free third party software such asBonjour Browser or MT Discovery. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved