HANNspree ST551MUB User Manual

Also see for 15" Liquid Crystal Display Television: User manual User manual Quick start guide

Contents

HANNspree ST551MUB User Manual Manual pdf 40 page image

39English6 Appendix: Remote Control Guide6.1 IntroductionThe electronic equipment type switch buttons are used for switching the currentelectronic equipment type on the remote control.The remote control includes 4 electronic equipment types: DVD, AUDIO, CABLE andTV.The remote control keypad matrix includes 4 electronic equipment type switchbuttons (DVD, AUDIO, CABLE and TV). If switching the current electronic equipmentis desired, just press the button of the electronic equipment type you wish to switchto, e.g., press the TV button for TV; the corresponding indicator light then comes onfor 2 seconds then it goes off after, and now the current electronic equipment modehas been switched to TV.6.1.2 Setting Program CodesElectronic equipment code setting mode is used for setting electronic equipmentcodes for various types of electronic equipment. Electronic equipment codes are 4digits. Electronic equipment codes can be looked up in the electronic equipmentcode list of the appendix.Electronic equipment code setting mode has the following operating procedures:1. Select a 4-digit code from the list (start from the first code if more than one).2. Select the desired corresponding mode of electronic equipment type; for example,DVD players.3. Press DVD button. The indicator light will come on for 2 seconds then it goes off;after 3 seconds, the indicator light will come on again, showing that the setting modehas been entered.4. Hold the electronic equipment button, while pressing digit keys corresponding tothe electronic equipment code in sequence. The indicator light will flash once eachtime when a digit was inputted, and if the indicator light does not come on again aftergoing off, the input code is valid; if the indicator light comes on again after going offfor 2 seconds, the code is invalid, and users will be prompted to input otherelectronic equipment codes.5. During the setting process, releasing the electronic equipment button exits thesetting mode immediately without changing the status prior to setting.