HAMPTON BAY SKU 759-133 Instruction Manual

Contents

HAMPTON BAY SKU 759-133 Instruction Manual Manual pdf 4 page image

TROUBLE SHOOTING:PRODUCT MAINTENANCE:1. Turn off power to the light fixture.2 To clean simply wipe with a soft dry cloth.3. Do not use any cleaners with chemicals, solvents or harsh abrasives.4. Allow the fixture to dry completely before power is restored.LIMITED WARRANTYThe manufacturer warrants this lighting fixture to be free from defects in materialsand workmanship for a period of five (5) years from date of purchase. This warrantyapplies only to the original consumer purchaser and only to products used in normaluse and service. If this product is found to be defective, the manufacturer’s onlyobligation, and your exclusive remedy, is the repair or replacement of the product atthe manufacturer’s discretion, provided that the product has not been damagedthrough misuse, abuse, accident, modifications, alterations, neglect or mishandling.This warranty shall not apply to any product that is found to have been improperlyinstalled, set-up, or used in any way not in accordance with the instructions suppliedwith the product. This warranty shall not apply to a failure of the product as a resultof an accident, misuse, abuse, negligence, alteration, or faulty installation, or anyother failure not relating to faulty material or workmanship. This warranty shall notapply to the finish on any portion of the product, such as surface and/or weathering,as this is considered normal wear and tear. The manufacturer does not warrant andspecially disclaims any warranty, whether express or implied, of fitness for aparticular purpose, other than the warranty contained herein. The manufacturerspecifically disclaims any liability and shall not be liable for any consequential orincidental loss or damage, including but not limited to any labor/expense costsinvolved in the replacement or repair of said product.Problem Possible Cause Corrective Action1. Light bulb is burned out. 1. Replace light bulb.2. Power is off. 2. Make sure power supply ison.3. Faulty wire connection. 3. Check wiring.Light Bulb will not illuminate.4. Faulty switch. 4. Test or replace switch.Fuse blows or circuit breakertrips when light bulb isilluminated.Crossed wires or power wireis grounding out.Check wire connections.4