Dismount Brushes Use the support roller located at thefront side of the Hakomatic to setthe machine into its park position. Loosen slotted screw by means of acoin. Open brush cover and remove bru-shes. Re-close cover and tightenslotted screw.When inserting the brushesfor the next operation, makesure to change position ofthe brush such that one-sided brush wearing is pre-cluded.14Description Open brush cover in direction 2. Remove brushes Clean brush compartment Insert brushes, close brush coverand secure with slotted screw. Set Hakomatic in upright position. Use adjustment screw to set theoperating handle into working posi-tion. Set front support roller into workingposition. Re-insert fresh and soiled watertanks.SqueegeeThe Hakomatic E 10 has beenequipped with a squeegee of 450mmworking width. The squeegees can belifted-out alternately.Check the squeegee for col-lected foreign particles andfor proper condition beforestart of operation.Brush MaintenanceFig. 1Fig. 2 Remove fresh and soiledwater tanks Use the support roller located at thefront side of the Hakomatic to setthe machine into its park position. Use the adjustment screw to set theoperating handle of the machine intovertical position, and then tilt themachine down as represented. Loosen slotted screw and fix thebrushes manually as represented inFig. 2 in direction 1.Dismount Brushes Use the support roller located at thefront side of the Hakomatic to setthe machine into its park position. Loosen slotted screw by means of acoin. Open brush cover and remove bru-shes. Re-close cover and tightenslotted screw.Description Open brush cover in direction 2. Remove brushes Clean brush compartment Insert brushes, close brush coverand secure with slotted screw. Set Hakomatic in upright position. Use adjustment screw to set theoperating handle into working posi-tion. Set front support roller into workingBrush MaintenanceFig. 1

Preface

Notes on Warranty

Operation

Transport

Park Position

Hakomatic

Assembly

Controls

Detergent Infeed

Mount/Dismount Brushes

Squeegee

Squeegee (Initial Fitting)

Clean Nozzle

Fill Water

Soiled and Fresh Water Tanks

Electric System

Technical Data

Maintenance Works

HAKO Scrubmaster E10 Instruction Manual

Scrubmaster E10

HAKO Scrubmaster E10 Instruction Manual

Product

Learn More

Legal