Menu
HAITWIN-Delphin KORAT-1701 User Manual
                  | |
KORAT-70 / KORAT-76KORAT-70/KORAT-76BAnK identificationDaisy-chained switches are referred to as slaves or BAnKs and assigneda location iD. For example, the console keyboard, monitor and mouse thatconnect to the Master switch has a BAnK iD of “ ”. The decimal pointdenotes the Master switch.if, for example, a user selects BAnK 2 as the new Master switch then theBAnK iD displays .(note: a BAnK iD succeeded by a decimal point denotes Master switch status.)HOT KeYsport identificationeach computer in an Black cAT5 installation has a unique port iD. you candirectly switch the KvM focus to any computer by entering the switch portnumber and the BAnK number (for daisy-chained installations). each isassigned a two digit numeric iD.invoking Hot Key ModeAll Hot key operations begin with invoking the Hot Key mode. simply invokethe Hot Key mode by pressing; [sCROLL LOCK], [sCROLL LOCK] withintwo seconds.single switch installationn The BAnK number (y) is the first two digit number that identifies theswitch’s position. in a single switch installation the BAnK number is always“00”.n The port number (X) is a two the two digit number (preceded by the BAnKnumber) that identifies the port on the Black cAT5 switch that the computeris connected to.For example, a computer connected to Port 8 has the numeric iD of 0008.(note: the BAnK number always precedes the port number.)Daisy-chained installationnThe BANK number (Y) is the first two-digit number that identifies theswitch’s position in a daisy-chained installation.nThe Port number (X) is a two-digit number that identifies the port on theKvM switch that the computer is connected to.For example, a computer connected to ‘Port 8’ of ‘BANK 6’ has the numericiD of 0608. (note: the BAnK number always precedes the port number.)note: The above working diagram represents a KORAT-1716 daisy-chained with a single.selecting the Active portDirectly switch the KvM focus to any computer by entering the BAnK numberand the port number:For example, to access the computer connected to Master, port 8,press: [SCROLL LOCK],[SCROLL LOCK] , “0008”For example, to access the computer connected to Bank 1, port 4,press: [SCROLL LOCK], [SCROLL LOCK] , “0104”BAnK 00(MAsTeR)BAnK 01(sLAVe) |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved