Geemarc Viso 5 User Manual

Contents

Geemarc Viso 5 User Manual Manual pdf 1 page image

1 2 3User ManualViso5 –MSF (UK)!!! PLEASE REFER TO OUR WEBSITE: WWW.GEEMARC.COMFOR AN UP TO DATE USER GUIDE, AS THERE MAY BEIMPORTANT UPDATES AND CHANGES YOU NEED TO BEAWARE OF !!!1. Features- Easy to Read and Understand Time display- Perpetual Calendar Up to Year 2099- 5 languages user selectable at the starting- Day of the week, month, stage of the day modes2. Unit AppearancePart A-LCD Part B-ButtonA1: Day of Week or MonthA2: Stage of the dayA3: PhotoframeA4: Radio Control IconB1: “SET/ ”ButtonB2: “▲” ButtonB3: “▼” ButtonPart C-StructureC1: Hanging HoleC2: Battery DoorC3: Stand3. Insert a picture:⚫ Remove the temporary picture with dry protection bysliding upwards.⚫ Insert your picture which needs to be 15x11cm and slidedown.4. TO BEGIN:⚫ Open the battery Cover (C2).⚫ Insert 2 x AAA size batteries observing polarity [“+” and“–“marks].⚫ Replace battery compartment cover (C2).4.1 First startingTo begin, you have 1 minute to arrange the first setting. Theclock displays English, press “▲” (B2) or ”▼” (B3) to selectyour language and press “SET/ ” (B1) to validate,Press ”▲” (B2) or ”▼” (B3) to choose the mode of displayset and press “SET/ ” (B1) to validate (see note).If you don’t press any keys, after 1 minute the Viso5 willlaunch the automatic clock setting.Note: Place the VISO5 near a window for the clock toautomatically set.-DP-1 displays the day of the weekand the 2nd line the part of the day.-DP-2 displays the Month and the 2ndline the date and the year.-DP-3 displays the day of week andthe 2nd line the time.-DP-4 rotates between all 3 displays and you can set the timethat each display is shown. See chapter 4.3.C for fullinstructions.4.2 Radio Controlled Time:⚫ The clock automatically starts to scan the MSF time signalin the first 10 minutes. (Radio Control Icon “ ” (A4)flashes on LCD).(A4) flashing Indicates the MSF signal isbeing received(A4) Continuous flash Indicates signal receivedsuccessfully(A4) Icon disappears Indicates signal receptionfailed⚫ The clock can be set to scan the radio signal manually byholding “▼”(B3) button for 3 seconds. Each receptiontakes around several minutes. If the reception fails,scanning stops. (“ ”(A4) on LCD disappear) and repeatsagain on next full hour. E.g. scanning failed at 8:20a.m. Itwill scan again at 9:00a.m.⚫ Summer and winter time change (and reverse) is setautomatically.4.3 Time SettingYou must wait 10 min to check the clock is set automatically(see chapter 4.2) before you proceed to the setting, pressand hold “▼”(B3) for 3 seconds to turn off the automaticclock setting (icon (A4) disappears).

/ 2

Related manuals for Geemarc Viso 5