Geemarc Viso 20 Instruction Manual

Geemarc Viso 20 Instruction Manual Manual pdf 1 page image

1 2 3INSTRUCTION MANUAL!!!Please refer to our website: www.geemarc.comfor an up to date user guide, as there may beimportant updates and changes you need to beaware of !!!Cautions:Precautions and maintenancez For indoor use onlyz To avoid risk of fire or electric shock, do not expose the unit tomoisture or condensation.z To avoid overheating, do not block the ventilation holes on theback of the Clock Display.z Keep the Clock Display out of direct sunlight.z Do not dismantle the Clock Display. There is a risk of electricshock and there are no user-serviceable parts inside.Dismantling the Clock Display will void your warranty.Cleaning the LCD Screenz Treat the screen carefully. tThe screen of the Clock Display ismade of glass and can easily be broken or scratched.z If fingerprints or dust accumulate on the LCD screen, werecommend using a soft, non-abrasive cloth such as a cameralens cloth to clean the LCD screen.z Moisten the cleaning cloth with a cleaning solution and apply thecloth to the screen.Introduction:Thank you for the purchase of the Clock Display. It is designed toallow you to see the time quickly and easily and any warningfunctions displayed.Please read this User Manual carefully to use the Clock Displaycorrectly.Features: Days ClockPackaging Check List:z 7 inch Clock Displayz User manualz Bracketz AC adapter1. Product Diagram1.1 Back side Buttons1. Menu2. Exit3. Vol- / Up / Left / Increase4. Vol+ / Down / Right / Reducing5. Play / Pause / OK1.2 Left side of the Clock DisplayDC in “ ” on the left side of the Clock Display.2. Getting Started1. Place the Clock Display with installing bracket on a steady flatposition, then plug the AC adapter into a standard 100-240V ACelectrical outlet and the other end into the DC IN slot on the leftside of the Clock Display.2. Remove the protective film covering the Screen.3. Hold and Press the MENU button on the backboard to On/OffSwitch.3. Operating InstructionWhen you power the unit on for the first time it will show thestartup logo. Then the main menu will display after a few seconds.After this the Days Clock will display you can easy see the detailsweek day, time, month and year on the Clock Display screen, andthey will change automatically.4.SettingPress Menu key and select the Setting icon in the main menu.Press “ ” Button to enter the Setting interface and pressto highlight your selection. Press “ ” Button to enterthe setting value. Then hold and press to set the value.You can select Style Setup, Set Days-Clock, Calendar Setup,System Setup, and so on.4.1. System SetupLanguageChanges the operating language of the photo Clock Display.Available Values: English, Nederland, Français, Deutsch, Italiano,Espanol, Hebrew.GrayscaleHold and press “ ” or “ ” buttons to select the Gray Scalelevel that you require between 1 to 10.BrightnessHold and press “ ” or “ ” buttons to select the Brightnesslevel that you require between 1 to 10.ContrastHold and press “ ” or “ ” buttons to select the Contrastlevel that you require between 1 to 10.Auto power on & off functionRemarks:1. In order to activate the auto power ON & OFF function, pleasecheck the settings for the Sleep timer and Auto boot Time areset correctly. If set to OFF, the function is not activated.2. A reminder for the Auto OFF appears 1 Minute before the frameswitches off. Press any key to cancel the Auto OFF function.3. If Power OFF is activated and the frame switches off at theselected time, the frame goes into Sleep-mode. To switch theframe on again, you need to press and hold the Menu Button atthe rear side of the frame.Auto Shut TimeSet the auto power off time in the format of “[Hour]:[Minute]”.Choose System setup/ Auto shut time with . Usethe “ ” or “ ” buttons to switch between fields, hold andpress “ ” or “ ” buttons to change time field values. Keepthe Sleep Timer on.Auto Boot TimeSet the auto power on time in the format of “[Hour]: [Minute]”.Choose System setup/ Auto boot time with Use the “ ”or “ ” buttons to switch between fields, hold and press “ ”or “ ” buttons to change time field values. Keep Regular Booton.Power Frequency:You can choose to set the function auto power ON/OFF as follows:- Workday, Week end, Once, Every day. Use the “ ” or “ ”buttons to switch between fields, hold and press “ ” or “ ”buttons to change mode field values.Firmware Version:You can check the software version of your Viso 20.

/ 2

Related manuals for Geemarc Viso 20